(A) The final plat shall be at the same scale, same sheet size, graphic media and shall conform substantially to the preliminary plat as approved and shall constitute only that portion of the approved preliminary plat which the subdivider proposes to record at the time.
(B) The final plat will show:
(1) The lines of all streets and roads;
(2) Lot lines and lot number;
(3) Minimum building setback lines;
(4) Reservations, easements, alleys and any areas to be dedicated to public use or sites for other than residential use with notes stating their purpose and any limitations;
(5) Sufficient data to determine readily and reproduce on the ground, the location, bearing and length of every street line, lot line, boundary line, block line and building line, whether curved or straight, and including true north point. This should include the radius, center angle and tangent distance for the center line of curved streets and curved property lines that are not the boundary of curved streets;
(6) All dimensions should be to the nearest hundredth of a foot and angles to the nearest second;
(7) Accurate location and description of all permanent monuments and stakes;
(8) The names and locations of adjoining subdivisions and streets, and the location and ownership of adjoining unsubdivided property;
(9) Title, date, name and location of subdivision, graphic scale and north point (indicate if true north, magnetic north or State Grid System is used);
(10) Name of owner, surveyor or land planner;
(11) Sketch vicinity map showing relationship between subdivision and surrounding area;
(12) Provide maintenance of streets guarantee until acceptance by the State Department of Transportation;
(13) Payment of fees for water laterals and meters in areas served by the County Water System. The fee shall be paid to the County Water Department in accordance with a fee schedule established from time to time by the County Board of Commissioners; and
(14) Payment of fees for street signs.
(C) As-built drainage plan shall show:
(1) The lines of all streets and roads;
(2) Lot lines and lot number;
(3) Location of all ditches (includes road and outfall), culverts and related drainage structures;
(4) High and low ditch inverts elevations. Flow arrows shall be shown along ditches;
(5) Culvert material, size and inverts; and
(6) Location of all fire hydrants within subdivision with bench mark elevations established on the top nut and denoted.
(D) Driveway culvert installation plan. In addition to the information included on the as-built drainage plan, the plan shall show:
(1) Percent of slope on all ditches indicated to the nearest hundredth of a percent;
(2) Indicate, at each lot corner that coexist with road right-of-way, the roadway ditch invert (calculated according to ditch slopes); and
(3) Indicate, on each lot, the minimum driveway culvert size that provides for proper drainage and meets NCDOT requirements.
(Ord. passed 4-17-1989; Ord. 2, passed 8-17-1992; Ord. 7, passed 7-17-1995; Ord. 8, passed 2-19-1996; Ord. 17, passed 11-21-2005)