(a) Purpose and Scope. The purpose of the M-3 District is to accommodate those heavy manufacturing and other industrial uses which cannot eliminate or adequately reduce objectionable influences, but which, nevertheless, should be provided for somewhere in the City. It consists of land which is presently in the flood plain or better known as the F-1 District which is lower than 610 feet above sea level and also at the time this section was passed (February 27, 1973), was in an industrial zone.
(b) Principal Permitted Uses. The same requirements for the M-1 District will apply in the M-3 District except that the following shall be additional principal permitted uses:
(1) Boat building; boats over five tons.
(2) Cement block and cement molded products manufacture.
(3) Cement bulk storage and bulk distribution of cement.
(4) Metal reclamation from scrap which contains nonmetallic material.
(5) Metal waste salvage and junk yards, including automobile junk yards, salvage operations, and reclamation of barrels and drums.
(6) Mining, including commercial mines, quarries and extraction of sand, gravel and clay or earth fill.
(Ord. A-2530. Passed 2-27-73; Ord. 0-1552. Passed 10-25-16.)