§ 151.071 INFORMATION IN FLOOD HAZARD AREAS WITHOUT BASE FLOOD ELEVATIONS.
   Where flood hazard areas are delineated on the FIRM and base flood elevation data have not been provided, the Floodplain Administrator shall:
   (A)   Require the applicant to include base flood elevation data prepared in accordance with currently accepted engineering practices.
   (B)   Obtain, review, and provide to applicants base flood elevation and floodway data available from a federal or state agency or other source or require the applicant to obtain and use base flood elevation and floodway data available from a federal or state agency or other source.
   (C)   Where base flood elevation and floodway data are not available from another source, where the available data are deemed by the Floodplain Administrator to not reasonably reflect flooding conditions, or where the available data are known to be scientifically or technically incorrect or otherwise inadequate:
      (1)   Require the applicant to include base flood elevation data prepared in accordance with currently accepted engineering practices; or
      (2)   Specify that the base flood elevation is two feet above the highest adjacent grade at the location of the development, provided there is no evidence indicating flood depths have been or may be greater than two feet.
   (D)   Where the base flood elevation data are to be used to support a Letter of Map Change from FEMA, advise the applicant that the analyses shall be prepared by a Florida licensed engineer in a format required by FEMA, and that it shall be the responsibility of the applicant to satisfy the submittal requirements and pay the processing fees.
(Ord. 2014-02, passed 2-25-2014; Ord. 2020-01, passed 3-24-2020)