(A) All applications for building permits for any structure and its accessory buildings shall be accompanied by scale drawings at a scale acceptable to the Building Official in the appropriate number showing the following:
(1) The actual dimensions and shape of the lot or lots to be built upon, including the location and actual boundaries of abutting watercourses and water bodies.
(2) The exact sizes and locations on the lot of buildings already existing, if any.
(3) The locations and dimensions of the proposed buildings or alterations.
(4) The location and layout of the proposed sewage disposal system.
(5) When applicable, the required parking spaces, loading and unloading spaces, maneuvering spaces and openings for ingress and egress.
(6) When applicable, grading and drainage plans showing any and all cuts, fills and provisions for adequately carrying off surface water on premises plus provisions for any surface water which would naturally flow over or through the area. Such plans shall be reviewed and approved by the Land Development Review Engineer.
(7) Such other information as lawfully may be required by the Building Official, including existing or proposed building or alteration; existing or proposed uses of the building and land; the number of families, housekeeping units, or rental units the building is designed to accommodate; conditions existing on the lot; and such other matters as may be necessary to determine conformance with, and provide for the enforcement of this chapter.
(B) One (1) copy of the plans shall be returned to the applicant by the Building Official after he shall have marked such copy either as approved or disapproved and attested same by his signature on such copy. The original, similarly marked, shall be retained by the Building Official.
('74 Code, § 25-253) (Ord. 89-08, passed 4-27-89; Am. Ord. 2016-17, passed 4-21-16)