(A) Submission. Three (3) copies of the final plat, a CD or other approved electronic copy of the plat and construction plans shall be submitted with a completed application to the Land Development office. The final plat shall be drawn in ink on tracing cloth on sheets twenty- four (24) inches wide by thirty (30) inches long and shall be at a scale of two hundred (200) feet to one (1) inch or larger with a preferred scale of one hundred (100) feet to one (1) inch. Where necessary, the plat may be on several sheets accompanied by an index sheet.
(B) Design and contents of the final plat. The final plat and construction plans for the subdivision shall be designed and in conformity with the design standards established herein and must show the following information:
(1) The final plat shall be prepared in conformance with the requirements of the applicable Florida Statute;
(2) The primary control points, approved by the City Engineer, or descriptions and “ties” to such control points to which all dimensions, angles, bearings and similar data on the plat shall be referred;
(3) The tract boundary lines, right-of-way lines of streets, easements and other rights-of-way, and property lines of residential lots and other sites, with accurate dimensions, bearing or deflection angles, and radii, arcs and central angles of all curves;
(4) The name and right-of-way width of each street or other right-of-way;
(5) The location, dimensions and purpose of any easement;
(6) Numbers or letters to identify each lot or site;
(7) The purpose for which sites, other than residential lots, are dedicated or reserved;
(8) The location of monuments;
(9) Reference to any recorded subdivision plat of adjoining platted land by plat book, page and number;
(10) A certification of a surveyor as to the accuracy of the survey and plat;
(11) A certification of title showing that the applicant is the landowner;
(12) Statements by the owner dedicating streets, rights-of-way and any sites for public uses.
(C) Design and contents of the construction plans. The construction plans shall show the following information:
(1) The title, scale, north arrow and datum;
(2) The plans of streets and drainage showing grades approved by the City Engineer and any other public improvements; such plans shall be drawn to city standard scales and elevations and shall be based on datum plane approved by the City Engineer and shall be in conformance with the design specifications of the Public Works Manual of the city.
(3) Two copies of stormwater calculations.
(4) A tree survey meeting the requirements of Chapter 180, trees and shrubbery.
(Ord. 96-05, passed 2-15-96; Am. Ord. 2016-32, passed 5-19-16)