(A) Submission. Three (3) copies of the preliminary plat, a CD or other approved electronic copy of the plat and the required supplementary material shall be submitted to the Land Development office along with a completed written application. The preliminary plat shall be at a scale of two hundred (200) feet to one (1) inch or larger, with a preferred scale of one hundred (100) feet to one (1) inch.
(B) Design and required information. The preliminary plat shall be designed in conformity with the design standards established herein and shall contain the following information:
(1) The title and certifications, the present tract designation according to official records in the office of the appropriate recorder, the title under which the proposed subdivision is to be recorded, with the names and addresses of the owners, and a notation stating the approximate acreage and the scale and north arrow;
(2) All streets, including their names and right-of-way widths;
(3) Other rights-of-way and easements, including their locations, widths and purposes;
(4) The location of utilities, if not shown on other exhibits;
(5) The lot lines, lot numbers and block numbers;
(6) The sites, if any, to be reserved or dedicated for parks, playgrounds or other public uses;
(7) The site, if any, for multi-family dwellings, shopping centers, churches, industries or other nonpublic uses, exclusive of single-family dwellings.
(8) Site data, including but not limited to, the number of residential lots, typical lot sizes and the approximate number of acres in parks;
(9) The protective covenants whereby the subdivider proposes to regulate land use in the subdivision and otherwise protect the proposed development.
(10) Existing conditions such as boundary lines, adjacent easements showing their locations, widths and purposes, streets on or adjacent to the subdivision showing their right-of-way widths and locations, adjacent utilities including the location, size and invert elevation of sanitary sewer, the location and size of water mains, and the location of fire hydrants, electric poles, telephone poles and street lights. If water mains and sewers are not on or adjacent to the tract, the directions and distance to and size of the nearest ones shall be shown, indicating the invert elevation of the sewers.
(11) The approximate direction and gradient of the ground slope on adjacent land shall be shown including any embankments or retaining walls. Adjacent platted land shall be referred to by book and page number and subdivision title.
(Ord. 96-05, passed 2-15-96; Am. Ord. 2016-32, passed 5-19-16)