(a) Permanent concrete monuments shall be accurately set and established at the intersections of all outside boundary lines of the subdivision; at the intersections of those boundary lines with all street lines; at the beginning and end of all curves; at points on curves where the radius or direction changes; and at such other points as are necessary to establish definitively all lines of the plat, including all lot corners.
(b) Stone or concrete monuments shall be at least six inches in diameter, and shall be provided with an appropriate center point.
(c) Solid iron pins or iron pipe monuments at least one inch in diameter and at least 30 inches long may be used at all other points.
(d) Iron pins shall be set for the right-of-way prior to the installation of the permanent monuments on the center line of the road and before recording of the plat. Any pins set shall be located on the plat.
(Ord. 16-19. Passed 9-16-19.)