§ 154.18  EXTERIOR APPEARANCE STANDARDS.
   (A)   Manufactured homes.
      (1)   Manufactured homes shall be classified as to acceptable compatibility or similarity in appearance with site-constructed residences, as follows:
         (a)   Manufactured homes shall have more than 950 square feet of occupied space in the double-section or larger multi-section unit;
         (b)   Manufactured homes shall be placed onto a permanent foundation;
         (c)   Manufactured homes shall utilize a permanent perimeter enclosure in accordance with approved installation standards, as specified § 154.19;
         (d)   Manufactured homes shall be anchored to the ground in accordance with the One- and Two-Family Dwelling Code and manufacturer’s specifications;
         (e)   Manufactured homes shall have wheels, axles, and hitch mechanisms removed;
         (f)   Manufactured homes shall have utilities connected in accordance with the One- and Two-Family Dwelling Code and manufacturer’s specifications;
         (g)   Manufactured homes shall have siding material of a type customarily used on site-constructed residences (see Approved Materials List); and
         (h)   Manufactured homes shall have roofing material of a type customarily used on site-constructed residences (see Approved Materials List).
      (2)   Manufactured homes meeting the foregoing standards and characteristics are permitted in residential, general business, local business, and light industrial areas within the town.
   (B)   Manufactured dwellings. Manufactured dwellings are permitted in manufactured dwelling subdivisions or parks if they meet the following standards and characteristics.
      (1)   Manufactured dwellings shall have more than 320 square feet of occupied space in a single, double, or multi-section units.
      (2)   Manufactured dwellings shall be placed onto a support system in accordance with approved installation standards, as specified in § 154.19.
      (3)   Manufactured dwellings shall be enclosed with foundation siding/skirting in accordance with approved installation standards, as specified in § 154.19.
      (4)   Manufactured dwellings shall be anchored to the ground in accordance with manufacturer’s specifications or the ANSI/NFPA 501 Installation Standards.
      (5)   Manufactured dwellings shall have utilities connected in accordance with manufacturer’s specifications or the ANSI/NFPA 501 Installation Standards.
(Ord. 1999-4, passed 5-18-1999)