The final plat must be prepared in accordance with chapter 13 of title 50, Idaho Code, and shall contain the following information:
A. Name of the subdivision.
B. Names of adjacent subdivisions and owners of adjoining parcels of unsubdivided land.
C. Names and addresses of the subdivider, owner and engineer.
D. Location by section, town, range, township, county, state.
E. Names of streets within the adjoining plat.
F. All plat boundaries.
G. Bearings and distances to the nearest established street lines, section corners or other recognized permanent monuments which shall be accurately described on the plat.
H. Municipal, township, county or sectional lines accurately tied to the lines of the subdivision by distance and bearings.
I. Accurate location of all monuments.
J. Length of all arcs, radii, internal angles, points of curvature and tangent bearings.
K. When lots are located on a curve or when side lot lines are at angles other than ninety degrees (90°), the width at the building line shall be shown.
L. Date of preparation of plat, scale of map, north points.
M. All easements for right of way provided for public services or utilities, and any limitations of such easements.
N. All lot numbers and lines, with accurate dimensions in feet and hundredths, and with bearings or angles to street and alley or crosswalkway lines.
O. Accurate outlines of any areas to be dedicated or temporarily reserved for public use with the purpose indicated. (Ord. 786, 3-8-2016)