(A) The perimeter and outfall protection inspection must be performed prior to the permittee’s breaking ground or disturbing soil with exception for installation of sediment control practices at the hydrologic perimeter and outfall(s) of a construction site. The inspection shall include participation by the county, the permittee and the permittee’s contractor.
(B) The perimeter and outfall protection inspection may only be performed after the review and acceptance by the county of a perimeter control plan.
(C) Clearing, except that necessary to establish perimeter sediment control devices, shall not begin until perimeter and outfall sediment control devices have been installed and have been stabilized.
(D) The county shall inspect the proposed construction site within seven calendar days after the submittal of the plan and installation of the perimeter protection devices.
(1) The Inspector shall in writing either approve the portion of work completed or notify the permittee where the work fails to comply with the approved perimeter protection plan.
(2) Failure by the county to perform the inspection within seven days will allow the permittee to begin land-disturbing activities, but may be subject to subsequent inspections by the county and revisions in the perimeter protection plan.
(3) Inspection of perimeter and outfall protection measures shall consist of a written checklist for each type of protective measure to ensure that it was installed according to the approved plan and site-specific conditions.
(4) Measures shown on the plan may be modified at the time of inspection pursuant to agreement between the county and the permittee’s engineer.
(Ord. 05-830-326, passed 12-20-2005)