(a) Final plats shall be prepared and stamped by a registered surveyor or engineer. Said plats shall be drawn in black India ink on reproducible Mylar at a scale of one inch equals one-hundred (100) feet (1" = 100') and shall be a minimum of 18" x 24" and a maximum of 30" x 40" outside dimensions. The final plat shall also be submitted on a CD in AutoCAD format.
(b) Final plats shall include the following:
(1) A location map showing the relationship of the proposed subdivision to the surrounding area.
(2) The name of the subdivision, north arrow, scale, and date.
(3) The names of all adjoining property owners as shown on the preliminary plat.
(4) The boundary lines of the area being subdivided with accurate distance and bearings, including section, corporation, and county lines.
(5) Curve data for street including the radii, arcs, chords, chord bearings, tangent and central angle.
(6) Accurate dimensions for all lots, reserve parcels, rights-of-way, and easements.
(7) Accurate location of all required monuments.
(8) A summary of the area of land used for each of the following:
A. Lots.
B. Rights-of-way.
C. Parks, and
D. Other open space.
(9) Location of setback lines from all rights-of-way, public or private, and the building envelope shown on all irregular lots.
(10) An acknowledgment by and bearing the signature of the owner that the plat was prepared with the owner's consent and approval and dedicating the streets and the appropriate areas to Obetz.
(11) A statement signed by the owner setting forth the rights associated with the easements and reserve parcels shown on the plat.
(12) Certification by a registered surveyor that the information contained on the plat is true and correct and conforms to the requirements of these Subdivision Regulations.
(13) An approval block for the endorsement of the plat by the Mayor and Clerk upon the approval by Council. The approval block and associated subdivision plat wording is shown in Appendix E.
(14) Provisions for the dedication and acceptance of public land.
(c) The final plat shall not be approved until the following items have been submitted to the Zoning Inspector.
(1) Improvement plans prepared by a registered engineer for all required improvements at a scale of 1" = 50' on 24" x 36" or at such other scale acceptable to the Municipal Engineer.
(2) A landscaping plan.
(3) An erosion and sedimentation control plan as described in Section 1135.10.
(4) A letter from the Utilities Superintendent and Municipal Engineer approving the improvement plans for the sanitary sewer.
(5) A letter from the Utilities Superintendent and Municipal Engineer approving the improvement plans for the water distribution system.
(7) All approvals from regulatory agencies.
(8) Payment of all required fees.