927.03 GUYS AND GUY WIRES.

Guy wires shall be installed where a line terminates or changes direction. Guy wires shall not be smaller than No. 9 galvanized iron, and fastened to an anchor placed in line with the pull of the pole line at a distance from the pole of not less than one-half of the distance it is attached up the pole. It shall be insulated from the pole at a distance of not less than six feet by an insulator similar to No. 504, and a similar insulator shall be placed at least eight feet from the ground. A shield shall also be placed on all guys to extend at least eight feet or over above the ground. Line guys, when anchored to a pole eight feet or over above the ground, need not be shielded, but must have similar insulators as a ground guy.

(1961 Code Sec. 302)

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc