A plot plan submitted for a permit to build shall contain the following information:
(a) The elevation of the first floor of the dwelling, or attached garages or unattached garages, and other accessory buildings;
(b) The finish curb or crown elevation of the street at the point of extension of the lot line;
(c) The finish grade elevation at each principal corner of the structure;
(d) The finish grade elevation at both sides of abrupt changes of grade, such as retaining walls, slope, etc.;
(e) Other elevations that may be necessary to show grading and drainage;
(f) The sewer grade and elevation as approved by the Public Service Department or the City Engineer;
(g) A scale of the plot plan, which shall not be less than one inch equals twenty feet;
(h) The lot, lot number and allotment or other legal identification;
(i) The dimensions of the plot and the north point;
(j) The dimensions of the front or building lines, and rear and side yards;
(k) The location and dimensions of garages, carports and other accessory buildings;
(l) The location of walks, driveways and approaches;
(m) The location of steps, terraces, porches, fences and retaining walls;
(n) The locations and dimensions of easements, if any;
(o) The location, the width of streets and rights of way and the types of street surfaces; and
(p) Proposed drainage and curb cuts as approved by the Public Service Department or the City Engineer.
(Ord. 42-1981. Passed 2-23-81.)