§ 153.100 MONUMENTS AND MARKERS.
   (A)   Specifications. Monuments and markers must be follows:
 
Material
Minimum Size
Monument
Stone
6 in. x 6 in. x 30 in.
Marker
Iron pipes or iron or steel bars
15 in. x 3/4 in. dia.
 
   (B)   Placement and marking. Monuments and markers must be placed by a registered surveyor so that the scored or marked point coincides exactly with the point of intersection of the lines being monumented. They must be set so that the top of the monument or marker is level with the surface of the surrounding ground. Monuments must be marked on top with a copper or brass dowel.
   (C)   Location of monuments. Monuments must be set:
      (1)   At the intersection of lines forming angles in the boundaries of the development; and
      (2)   At the intersection of street lines.
   (D)   Location of markers. Markers must be set:
      (1)   At the beginning and ending of curves along street property lines;
      (2)   At points where lot lines intersect curves either front or rear;
      (3)   At angles in property lines of lots; and
      (4)   At all other corners.
   (E)   Removal. Any monuments or markers that are removed must be replaced by a registered surveyor at the expense of the person removing them.
(2006 Code, § 22-601) (Ord. 90-9, passed 9-10-1990, § 601; Ord. 94-02, passed 5-2-1994, Art. III; Ord. 2006-3, passed 7-10-2006) Penalty, see § 153.999