§ 155.180 DEVELOPMENT STANDARDS.
    (A)   (1)   All single-family detached dwellings (site-built, modular and manufactured homes), townhouse dwellings, duplex dwellings and triplex dwellings shall utilize at least two of the following design features to provide visual relief along the street-side frontage of the home:
         (a)   Dormers;
         (b)   Gables;
         (c)   Recessed entries;
         (d)   Covered porch entries;
         (e)   Cupolas;
         (f)   Pillars or posts;
         (g)   Bay or bow windows;
         (h)   Eaves (minimum 6" projection);
         (i)   Offsets on building face or roof (minimums 16");
      (2)   If alternative design features are proposed by an applicant not included in the options above, the applicant may apply to the Planning Commission for approval of the alternative design features.
   (B)   Different home designs in developments (minimums) (as measured by different roof lines window size and placement and/or entrance placement) (reverse designs don't count):
      (1)   Developments less than five: two;
      (2)   Developments less than 12: three;
      (3)   Developments of 12 or greater: four; and
      (4)   Single level homes for developments greater than three: 25% or more.
   (C)   All manufactured homes shall also comply with the requirements of §§ 155.430 through 155.432 of this chapter.
(Prior Code, §16.025.025) (Ord. 427, passed 5-16-2016; Ord. 451, passed 6-4-2018; Ord. 477, passed 2-22-2022)