§ 155.160 DEVELOPMENT STANDARDS.
    The following standards will be applied to all single-family dwellings (site-built, modular and manufactured homes) to be constructed or located in the city.
   (A)   (1) All single-family units shall utilize at least two of the following design features to provide visual relief along the street-side frontage of the home:
         (a)   Dormers;
         (b)   Gables;
         (c)   Recessed entries;
         (d)   Covered porch entries;
         (e)   Cupolas;
         (f)   Pillars or posts;
         (g)   Bay or bow windows;
         (h)   Eaves (minimum 6" projection);
         (i)   Offsets on building face or roof (minimum 16").
      (2)   If alternative design features are proposed by an applicant not included in the options above, the applicant may apply to the Planning Commission for approval of the alternative design features.
   (B)   Different home designs in developments (minimums) (as measured by different roof lines, window size and placement and/or entrance placement) (reverse designs are encouraged but don't count):
      (1)   Developments less than five: two;
      (2)   Developments less than 12: three;
      (3)   Developments of 12 or greater: four; and
      (4)   Single level homes for developments greater than three: 25% or more.
   (C)   All manufactured homes shall also comply with the requirements of §§ 155.515 through 155.518 of this chapter.
(Prior Code, §16.020.025) (Ord. 427, passed 5-16-2016; Ord. 451, passed 6-4-2018; Ord. 477, passed 2-22-2022)