(a) Traffic Control Signs. All street signs, street name signs and traffic control lights and signs shall be installed by the subdivider before acceptance of a road. All Traffic Control Signs shall conform to the specifications, requirements and locations as set forth in the Ohio Manual for Uniform Traffic Control Devices and as approved by the Village Engineer and Chief of Police.
(b) Street Name Signs: Such shall be furnished and installed by the Subdivider. The design of the signs shall be in accordance with published standards as prescribed by the Village Engineer and as approved by the Planning Commission and Chief of Police. Signs shall be placed as determined by the Village Engineer and the Chief of Police.
(c) Street Lighting: The subdivider shall install street lighting along all new and existing roads that are contiguous to the subdivision lots.
(1) All street lighting electric supply shall be contained in underground cables. Cable system shall be able to be metered if necessary.
(2) Street lighting shall be approved by the Planning Commission, and shall be in harmonious agreement with the architecture of the neighborhood and with street lighting in other North Perry subdivisions. Street lighting shall avoid any glare or direct light into existing homes. The Planning Commission shall also consider availability of replacement components and ease of maintenance.
(3) Street lighting shall be supported and paid by an association of property owners that benefit from such lighting.
(4) Street lighting facilities shall be permanently mounted on a foundation, and shall be spaced a maximum distance apart of one every 200 feet. All intersections shall have street lighting that illuminates the intersection and crosswalks from each corner.
(d) Traffic Control Lights: Electric traffic control lights and permanent warning blinker lights shall conform to the specifications, requirements and locations as set forth by the Village Chief of Police and the Ohio Manual of Uniform Traffic Control Devices.
(e) Roadway Painting, Marking and Stencils: Before acceptance of road dedication, all signage, traffic control lights, street lights, and roadway safety markings must be in place. All roadway painting and marking shall be approved on a plan in advance by the Village Engineer, Chief of Police, and the Planning Commission.
(1) Stop Sign: Traffic stop bars shall be placed on the pavement at each stop sign location.
(2) Crosswalks: Pedestrian crossing areas and bicycle crossing areas shall be marked on the pavement or permanently installed with colored and textured pavement and lighter color material for outlines.
(3) Edge Lines and Center Markings: All road edges shall be marked unless the Village Engineer and Police Chief waive the requirement due to curbing or other factors. All bicycle pathways attached to the roadway shall be appropriately marked with edge lines and stencils a maximum distance apart of one every 300 feet prohibiting vehicle access and indicating bicycle only use as approved by the Chief of Police.
(4) Traffic Safety Stenciling: Where traffic safety shall require road stenciling for such locations as roadway dividing (arrows), school crossing, bicycle path crossing or any other appropriate safety notice requirement, the sub- divider shall install such pavement stenciling as required by the Village Engineer and Chief of Police.
(Ord. 19-10. Passed 11-7-19.)