(a) Permanent monuments in accordance with the minimum standards for boundary surveys in the State of Ohio, or of a type acceptable to the Village Engineer shall be set under the direction of a registered surveyor at the intersections and angle points of all outside boundary lines of the platted property and at all points of intersection and the point of curvature and point of tangency for changes of horizontal alignment in the center lines of streets.
(b) A monument shall be accurately placed at each corner, each street intersection, at intermediate points and corners of lots, at intersections of easements with property lines, and at other locations as may be required by the Village Engineer. The top of the monument must be set at the finished grade upon completion of the grading of the streets and lots.
(c) Indicate the location and size of all corner pins or pipes found and set or to be set. Iron pins must be set at all parcel and easement corners and at the intersection of the property lines and easements with the right-of-way line. In cases where pins cannot be set as indicated above, witness pins shall be set and their location noted on the plat or plan.
(Ord. 19-10. Passed 11-7-19.)