Permanent signs for all residential uses and for nonresidential uses in residential districts and park districts shall comply with the regulations set forth in this Section.
(a) Single-family residential properties:
(1) Each single-family residential property is permitted a maximum of two (2) permanent signs provided the combined sign area does not exceed two (2) square feet in total sign area.
(2) Signs may be freestanding, mounted to a permanent building or structure or displayed in a window.
(3) Freestanding signs shall be located on private property, a minimum of six (6) feet from the street right-of-way and fifteen (15) feet from the side lot line.
(4) Freestanding signs shall not exceed four (4) feet in height.
(5) Signs shall not be illuminated.
(b) Nonresidential Uses in the R-1 Residential Zoning District and in the P-1 Park District:
(1) Nonresidential uses are permitted signs not to exceed thirty (30) square feet in total sign area. The sign area may be either a wall sign or a freestanding sign or a combination of the two.
(2) The height of a freestanding sign shall not exceed six (6) feet.
(3) A maximum of thirty percent (30%) of the area of a freestanding sign may be devoted to changeable copy, provided the changeable copy shall not be changed more than once per day.
(4) Freestanding signs may be illuminated in compliance with the illumination requirements in Section 1139.09.
(5) Conditionally permitted uses may be permitted additional sign area as part of conditional use approval by the Planning Commission if the Planning Commission determines that, because of the large size of the facility and its site, the proposed larger sign will be consistent with the objectives, intent and criteria of this Chapter.
(Ord. 19-10. Passed 11-7-19.)