(A) Generally. An adequate and safe sewerage system shall be provided in all mobile home parks for conveying and disposing of all sewage. Such system shall be designed, constructed and maintained in accordance with state and local laws.
(2011 Code, § 33.0121)
(B) Sewer lines. All sewer mains and laterals shall be constructed according to specifications of the city and connected to the city sewer system or a sewerage system approved by the city.
(2011 Code, § 33.0122)
(C) Sewer connections.
(1) Riser pipe. Each mobile home stand shall be provided with at least a four-inch diameter sewer riser pipe. The sewer riser pipe shall be so located on each standard that the sewer connection to the mobile home drain outlet will approximate a vertical position.
(2) Connection. The sewer connection shall have a minimum inside diameter of three inches and the slope thereof shall be not less than one-fourth inch per foot. The sewer connection shall consist of one pipe line only without any branch fittings. All joints shall be air- and water-tight.
(3) Materials. All materials used for sewers and sewer connections shall be semi-rigid, corrosive resistant, non-absorbent and durable. The inner surface shall be smooth.
(4) Drainage; plug. Provision shall be made for plugging the sewer riser pipe when a mobile home does not occupy the lot. Surface drainage shall be diverted away from the riser. The rim of the riser pipe shall extend at least to ground level.
(2011 Code, § 33.0123)