The following regulations shall govern the design and layout of lots:
(a) The lot arrangement and design shall be such that all lots will provide satisfactory building sites, properly related to topography and the character of surrounding development.
(b) All lots shall conform to, or exceed the requirements of, these Subdivision Regulations and the zoning district requirements for the district in which they are located and the use for which they are intended.
(c) Each lot shall front on a public thoroughfare. The minimum lot sizes, widths and setbacks shall be as specified in the Zoning Ordinance.
(d) All side lot lines shall be at right angles to street lines and radial to curved street lines, except where the Commission determines that a variation to this rule would provide a better layout.
(e) Lots with double frontage shall be avoided except where the Commission determines that it is essential to provide separation of residential development from arterial streets.
(f) No corner lot shall have a width at the building line in each direction of less than that which is consistent with the Zoning Ordinance.
(g) No lot shall have an average depth which is more than three times its average width, nor shall it have an average depth of less than 120 feet.
(Ord. 2019-4. Passed 10-14-19.)