(a) The preliminary drawing shall contain the following information:
(1) Proposed name of the subdivision, which shall not duplicate or closely approximate the name of any other subdivision in the Municipality.
(2) Location by section, range and township or other surveys.
(3) Names, addresses and telephone numbers of the owner, subdivider and person who prepared the drawing.
(4) Date of survey.
(5) Scale of the plat, north point (not more than 100 feet to the inch).
(6) Boundaries of the subdivision and its acreage.
(7) Names of adjacent subdivisions, owners of adjoining parcels of un-subdivided land and the location of their boundary lines.
(8) Locations, widths and names of existing streets, railroad rights-of-way, easements, parks, permanent buildings and corporation and township lines; location of wooded areas and other significant topographic and natural features within and adjacent to the plat for a minimum distance of 200 feet.
(9) Zoning classification of the tract and adjoining properties and a description of proposed zoning changes, if any.
(10) Existing contours at an interval of not greater than two feet if the slope of the ground is 15 percent or less; and not greater than five feet where the slope is more than 15 percent.
(11) Existing sewers, water lines, culverts and other underground structures and power transmission poles and lines within the adjacent to the tract.
(12) 100-year flood elevations and boundaries of flood-prone areas as defined according to FEMA maps.
(13) Location, names and widths of proposed streets and easements.
(14) Building setback lines with dimensions.
(15) Location and dimensions of all proposed utility and sewer lines, showing their connections with the existing system.
(16) Layout, numbers and approximate dimensions of each lot. When a lot is located on a curved street, or when side lot lines are not at 90 degree angles, the property line shall be shown.
(17) Proposed open space in acres to be reserved for public use or to be reserved by covenant for residents of the subdivision.
(18) Master stormwater management plan for the proposed development that demonstrates compliance with the Village's requirements and the Ohio EPA requirements.
(19) A vicinity map at a scale of not less than 400 feet to the inch shall be shown on, or accompany, the preliminary drawing. This map shall show all existing subdivisions, roads and tract lines and the nearest existing thoroughfares.
(20) The names and addresses of the owner or owners of record, the sub divider or developer and the engineer or surveyor.
(Ord. 2019-4. Passed 10-14-19.)