The final plat shall meet the following specifications:
(A) The final plat may include all or only a part of the preliminary plat which has received approval.
(B) The original drawing of the final plat of the subdivision shall be drawn to a scale of 50 feet to one inch. However, if the resulting drawing would be over 36 inches in shortest dimension, a scale of 100 feet to one inch may be used. Three black or blue line prints shall be submitted with the original final plat, or, in order to conform to modern drafting and reproduction methods, three black line prints and a reproducible print shall be submitted.
(C) The following basic information shall be shown:
(1) Accurate boundary lines, with dimensions and angles, which provide a survey of the tract, closing with an error of not more than one foot in 5000 feet.
(2) Accurate distances and directions to the nearest established street corners or official monuments. Reference corners shall be accurately described on the plan.
(3) Accurate locations of all existing and recorded streets intersecting the boundaries of the tract.
(4) Accurate metes and bounds description of the boundary.
(5) Source of title of the applicant to the land as shown by the last entry in the books of the County Recorder.
(6) Street names.
(7) Complete curve notes for all curves included in the plan.
(8) Street lines with accurate dimensions in feet and hundredths of feet, with angles to street, alley, and lot lines.
(9) Lot numbers and dimensions in accordance with zoning regulations.
(10) Accurate locations of easements for utilities and any limitations on such easements.
(11) Accurate dimensions for any property to be dedicated or reserved for public, semi-public, or community use.
(12) Building set back or front yard lines and dimensions.
(13) Locations, type, material, and size of all monuments and lot markers.
(14) Plans and specifications for the improvements required in this chapter.
(15) Restrictions of all types which will run with the land and become covenants in the deeds for lots.
(16) Name of the subdivision.
(17) Name and address of the owner and the subdivider.
(18) North point, scale, and date.
(19) Certification by a registered professional engineer or registered land surveyor.
(20) Certification of dedication of streets and other public property.
(21) Certificates for approval by the Commission.
(Ord. 2285, passed 4-16-79) Penalty, see § 151.99
Statutory reference:
Final plats, see IC 36-7-4-709