§ 153.078 TABLE OF MINIMUM LOT AND SETBACK REQUIREMENTS.
   (A)   Table. The table of minimum lot and setback requirements identifies the lot size and building location requirements for primary buildings in each zoning district provided by this chapter. General development standards and supplementary development standards shall also be considered and are provided in this chapter and §§ 153.095 through 153.101.
Table of Minimum Lot and Setback Requirements
Site Requirements
R-15
R-7.5
RA-1
MU-1
C-1
Table of Minimum Lot and Setback Requirements
Site Requirements
R-15
R-7.5
RA-1
MU-1
C-1
Minimum lot size
15,000 sq. ft.
7,500 sq. ft.
22,500 sq. ft.
15,000 sq. ft. for commercial; 7,500 sq. ft. for residential
BC
Minimum lot width
100 ft.
50 ft.
150 ft.
100 ft.
BC
Minimum front yard setback
20 ft.
20 ft.
20 ft.
20 ft.
BC
Minimum side yard setback
BC
BC
BC
BC
BC
Minimum rear yard setback
BC
BC
BC
BC
BC
Maximum building height
35 ft. as measured by BC
35 ft. as measured by BC
35 ft. as measured by BC
35 ft. as measured by BC
50 ft. as measured by BC
Note: BC = Building Code standard
 
   (B)   Exception to height limitations. The height limitations contained in this chapter do not apply to spires, cupolas, antennas, water tanks, ventilators, chimneys or other appurtenances usually required to be placed above the roof level and not intended for human occupancy.
   (C)   Less than one story above grade not permitted. No primary building shall be erected to a height less than one story entirely above grade.
(Prior Code, § 10-5-9) (Ord. passed 8-10-2006)