§ 153.237 TOOL, DIE, GAUGE, METAL PLATING AND MACHINE SHOPS.

Tool, die, gauge, metal plating and machine shops may be permitted in certain districts, as specified in this chapter, in conformance with the following.

(A) The application shall include a written report which documents conformance with the performance standards in § 153.172 and the standards in § 153.180, Site Plan Review.

(B) Outdoor storage yards shall conform to the provisions of § 153.231.

(C) Screening and landscaping shall be provided in conformance with §§ 153.173 and 153.177. The Planning Commission may require additional landscaping or screening where the Planning Commission determines it is necessary to protect adjacent properties or rights-of-way from negative impacts of the proposed uses(s).

(D) The site shall be designed to minimize the impact of the proposed facility on adjacent land uses and rights-of-way. This shall include building and outdoor use area design and location, screening, landscaping, bulk and height of proposed structures, and drive/parking location.

(Ord. passed 10-11-2000) Penalty, see § 153.999

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc