(a) Plat Required. After meeting informally with the Planning Commission, the subdivider shall cause to be prepared a preliminary plat prior to the making of any street improvements or the installation of any utilities.
(b) Plat Data. The preliminary plat shall meet the standards of design set forth in Chapter 1139 and shall contain the following information:
(1) A scale of 200 feet to one inch or larger;
(2) The name of the subdivision and the names and addresses of the owners, the engineer or surveyor and the owners of adjacent property;
(3) The date, approximate north point and graphic scale;
(4) The acreage of land to be subdivided;
(5) The contours at an interval of not greater than five feet or at a lesser interval if deemed necessary by the Commission;
(6) The boundary lines of the area to be subdivided and their bearings and distances;
(7) Existing and proposed easements and their locations, widths and distances;
(8) Streets on and adjacent to the tract and their names, widths, approximate grades and other dimensions as may be required;
(9) Utilities on and adjacent to the tract showing proposed connections to existing utility systems. Rear easements for utility poles and wires shall be required wherever possible;
(10) Lot lines and lot numbers;
(11) Sites and their acreages, if any, to be reserved or dedicated for parks, playgrounds, schools or other public uses, and sites, if any, for semipublic, commercial or multifamily uses;
(12) Minimum building set-back lines.
(c) Deed Restrictions. Copies of proposed deed restrictions, if any, shall be attached to the preliminary plat. (Ord. 2005-34. Passed 12-12-05.)