§ 50.058 HAULED WASTEWATER.
   (A)   Septic tank waste may be introduced into the POTW only at locations designated by the Superintendent, and at such times as are established by the Superintendent. Such waste shall not violate §§ 50.015 through 50.022 or any other requirements established by the city. The Superintendent may require septic tank waste haulers to obtain wastewater discharge permits.
   (B)   The Superintendent shall require haulers of industrial waste to obtain wastewater discharge permits. The Superintendent may require generators of hauled industrial waste to obtain wastewater discharge permits. The Superintendent also may prohibit the disposal of hauled industrial waste. The discharge of hauled industrial waste is subject to all other requirements of this chapter.
   (C)   Industrial waste haulers may discharge loads only at locations designated by the Superintendent. No load may be discharged without prior consent of the Superintendent. The Superintendent may collect samples of each hauled load to ensure compliance with applicable standards. The Superintendent may require the industrial waste hauler to provide a waste analysis of any load prior to discharge.
   (D)   Industrial waste haulers must provide a waste tracking form for every load. This form shall include, at a minimum, the name and address of the industrial waste hauler, permit number, truck identification, names and addresses of sources of waste, and volume and characteristics of waste. The form shall identify the type of industry, known or suspected waste constituents, and whether any wastes are RCRA hazardous wastes.
   (E)   There shall be a charge for the introduction of septic tank waste into the POTW as follows:
      (1)   $25 per 0-1,500 gallons;
      (2)   $45 per 1,501-3,000 gallons.
      (3)   3,000 gallons of hauled wastewater shall be the maximum load permitted.
(Ord. 02-09, passed 5-28-02; Am. Ord. 04-35, passed 10-25-04; Am. Ord. 05-13, passed 5-24-05)