(A) Permitted and special uses.
(1) All permitted and special uses as regulated in the underlying residential district.
(2) Class A multi-sectional manufactured homes meeting the appearance criteria set forth as follows.
(a) Length-width ratio: the minimum width (the width being the narrower of the two overall dimensions) of the main body of the manufactured home shall be at least 22 feet for a distance extending along the length (the length being the longer of the two overall dimensions) of at least 20 feet.
(b) Eaves: the roof shall have an overhang (eaves) extending at least six inches from each vertical exterior wall, excluding any guttering.
(c) Exterior finish: the exterior materials shall consist of wood, hardboard, vinyl, brick or aluminum and shall be comparable in composition, appearance and durability to site built houses in the vicinity. In no case shall the degree of reflectivity exceed that of gloss white paint.
(d) Foundation: a continuous permanent masonry foundation (consisting of brick, concrete block with stucco or fieldstone) un-pierced, except for required ventilation and access shall be installed upon a poured concrete footer after placement on the lot and within one month after occupancy.
(e) Hitch removal: the hitch, axle and transporting lights shall be removed within one month after occupancy.
(f) Orientation: the manufactured home shall be oriented on the site in such a manner that the side having the main entrance and by design is intended to be the front of the home, is parallel to the street abutting the site.
(B) Other requirements. The dimensional and other provisions of the underlying residential district shall be observed.
(Ord. passed 5-13-1996)