(A) Type I, Type II, Type III manufactured homes, and certified mobile homes shall be permitted only in manufactured home parks, except as provided for in this division.
(B) Classification of manufactured/certified mobile homes. Manufactured and certified mobile homes shall be classified by type as to acceptable compatibility or similarity in appearance with site constructed residences as defined.
(1) Type I manufactured homes shall:
(a) Have a minimum of one thousand four hundred and fifty-six (1,456) square feet of occupied space or twenty-six (26) feet by fifty-six (56) feet in a double or larger multi-section unit.
(b) Be placed on a permanent foundation.
(c) Utilize a permanent perimeter foundation and enclosure, if applicable, in accordance with approved installation standards, as specified in this chapter.
(d) Be anchored to the ground, in accordance with the One- and Two-Family Dwelling Code and to the manufacturer's specifications.
(e) Have wheels, axles, and hitch (tongue) mechanisms removed.
(f) Have utilities connected, in accordance with this chapter and manufacturer's specifications.
(g) Have siding material of a type customarily used on site-constructed residences.
(h) Have roofing materials of a type customarily used on site constructed residences.
(2) Type II manufactured homes shall:
(a) Have more than five hundred (500) square feet of occupied space in a single, double, expanded, or multi-section unit (including those with add-a-room units).
(b) Be placed onto a support system, in accordance with approved installation standards.
(c) Be enclosed with foundation siding/skirting, in accordance with approved installation standards.
(d) Be anchored to the ground, in accordance with manufacturer's specifications or the ANSI/NFPA 501 A Installation Standards; have utilities connected in accordance with manufacturer's specifications or the ANSI/NFPA 501 A Installation Standards.
(e) Have siding material of a type customarily used on site-constructed residences.
(f) Have roofing material of a type customarily used on site-constructed residences.
(3) Type III manufactured homes shall:
(a) Have more than five hundred (500) square feet of occupied space in a single, double, expando, or multi-section unit (including those with add-a-room units).
(b) Be constructed after the 1976 Federal Mobile Home Construction and Safety Act went into effect.
(c) Be placed onto a support system, in accordance with approved installation standards.
(d) Be enclosed with foundation siding/skirting, in accordance with approved installation standards.
(e) Be anchored to the ground, in accordance with manufacturer's specifications or the ANSI/NFPA 501 A Installation Standards.
(f) Have utilities connected, in accordance with manufacturer's specifications or the ANSI/NFPA 501 A Installation Standards.
(4) Certified mobile homes. For purposes of determining appropriateness for placement, certified mobile homes shall:
(a) Have more than five hundred (500) square feet of occupied space.
(b) Be placed onto support system, in accordance with approved installation standards, as specified.
(c) Be built prior to the 1976 Federal Mobile Home Construction and Safety Act and be upgraded to be able to receive a “B” seal certifying that the unit has been inspected and in compliance with standards set forth in the HUD Code.
(Ord. passed 4-12-16)