A. The minimum lot area, lot width and lot depth shall conform to the requirements of the zoning district in which the plat is situated as required by the City Zoning Ordinance.
B. Corner lots for residential use shall have sufficient width to permit appropriate building setback from both roads as required by the City Zoning Ordinance.
C. Side lines of lots shall be approximately at right angles to road or street lines or radial to curved road or street lines.
D. Double frontage lots shall be avoided except where lots back on a highway or other arterial street, or where topographic or other conditions render subdividing otherwise unreasonable. Such double frontage lots shall have additional depth sufficient to allow space for screen planting along the back lot line.
E. Every lot must have the minimum required frontage on a public dedicated road or street other than an alley, and have satisfactory access to such existing public street for purposes of firefighting, utilities and other public and quasi-public services. This requirement may be waived as to planned developments.
F. Setback or building lines shall not be less than the setback required by the City Zoning Ordinance. On those lots which are intended for business or industrial use, the setback shall not be less than the setback required by the City Zoning Ordinance. (Ord. 470, 2-18-1975)