The final plat and construction plans shall include the following information:
(A) The final plat shall be drawn in ink on Mylar, or the equivalent, and submitted on compact disk. All certifications shall be made in permanent black ink with each signature accompanied by the printed name. The final plat shall include:
(1) The name of the subdivision and phase (if applicable);
(2) Location by section, township and range, and by proper legal description;
(3) The signature, seal and certification of a land surveyor registered in the State of Indiana;
(4) Certification and dedication by the legal owner with a notarized signature;
(5) Certification of final approval and signature lines for the President and the Secretary of the Plan Commission;
(6) Scale shown graphically, date, and north point;
(7) Boundary lines of plat and acreage thereof, based upon an accurate survey performed in accordance with 865 I.A.C. Article 1.1, Chapter 12, and amendments thereto establishing minimum standards for the practice of land surveying;
(8) The true course and distance to the nearest established section line and official monument which accurately describe the location of the plat;
(9) City, town, township, county, or section lines accurately tied to the lines of the subdivision by courses and distances;
(10) Street designations and labels, in accordance with the provisions of these regulations and the Thoroughfare Plan, names and lines of all streets within and on the perimeter of the plat, with accurate dimensions in feet and hundredths and angles or bearings to streets, alleys and lot lines shown to the nearest second of an arc;
(11) Radii, central angles, tangents, lengths of arcs, curvatures, angles or bearings at street intersections and a complete street traverse of each street within and on the perimeter of the plat;
(12) Lines of any existing alleys within and on the perimeter of the plat, with accurate dimensions in feet and hundredths;
(13) All lot numbers and lines, with accurate dimensions in feet and hundredths together with the area of the lot in square feet. Lot numbers must be in conformance with lot numbers of the preliminary plan;
(14) Lines of all easements provided for public services, drainage and utilities, with accurate dimensions in feet and hundredths. No utility poles or pedestals shall be set on property lines or in drainage swales;
(15) Building setback lines accurately shown with dimensions; Street number for each lot as assigned by the Plan Commission;
(16) The location and description of all subdivision monuments set, or proposed to be set, as required by 865 I.A.C., Article 1, Rules 1-12. A legend indicating the monument description may be used;
(17) The following statement if the subdivision has received approval from the Morgan County Drainage Board:
This subdivision contains lineal feet of open ditches and lineal feet of tile drains. The lots in the subdivision are or may be subject to a drainage assessment under the authority of the Indiana Drainage Code.
(B) Detailed construction plans shall show the specific location and design of improvements to be installed in accordance with the requirements of these regulations and the conditions of primary approval.
(C) Separate plan and profile sheets must be provided for all proposed streets, storm sewers, and sanitary sewers. All crossings must be shown and correctly labeled.
(Ord. passed 10-11-2004)