(A) Monuments shall be one inch lead-filled pipe 30 inches long or one inch pipe or steel rods set in and running through a concrete block at least six inches in diameter and at least 30 inches long and the bottoms of such block shall be set at least 30 inches deep, below finished grade in the plat, and the points at which they may be found shall be designated on the plat. All monuments set in pavements shall be set in standard type monument boxes. Where new streets intersect existing highways, monuments shall be placed on the center line of the new road at the right-of-way of the existing road.
(B) A minimum of four monuments shall be set in each plat of ten lots or less, and not less than six shall be set in each plat containing over ten lots. Iron pins shall be set at all lot corners and in all changes in lot line direction. Monuments to be set on center line and right-of-way line and all P.C., P.T. and street intersections with additional monuments to be placed at the direction of the City Engineer.
(Ord. 57-1981, passed 10-21-81; Am. Ord. 2018-80, passed 11-20-18)