In addition to the provisions of Chapter 1272, the following standards for the arrangement and development of land and buildings are required in the Limited Industrial District.
(a) Lot Size; Use Regulations. Lot size shall be adequate to provide the yard space required by this section and the following provisions.
(1) A use allowed in this district shall entirely enclose its primary operation within a structure. Open storage and service areas and loading docks shall be screened by walls or fences at least six feet, but not more than 12 feet, in height. Such walls or fences shall have an opaqueness of 75% or more, so as to effectively conceal production, storage, service and loading operations from adjoining streets and from a Residential Zoning District or a Planned Development District, as listed in § 1238.04.
(2) Permitted uses of this District may be developed in accordance with the development standards of Chapter 1264.
(b) Lot Width. All lots shall abut a public street for a distance of 100 feet or more and have adequate width to provide the yard space required by this section.
(c) Side Yards. For main and accessory structures, including open storage, service and loading areas, the required side yards shall not be less than one-third the sum of the height and depth of the structure, nor less than 50 feet from any Residential Zoning District, as listed in § 1238.04
, except in accordance with the development standards of Chapter 1264
.
(d) Rear Yards. For main and accessory structures, including open storage, service and loading areas, the required rear yards shall not be less than one-third the sum of the height and width of the structure, nor shall the rear yards be less than 50 feet from any Residential Zoning District or Planned Development District, as listed in § 1238.04
, except in accordance with the development standards of Chapter 1264
.
(Ord. 5-89, passed 5-8-1989)