(a) The final plat shall show the following:
(1) The boundaries of the property, with accurate distances and bearings and the lines and the extent of all proposed streets, with their widths and names, and any other areas intended to be dedicated to public use;
(2) The lines of adjoining streets and alleys, with their widths and names;
(3) All lot lines and easements, with their dimensions;
(4) All dimensions, both linear and angular, necessary for locating boundaries of the subdivided area, including lots, streets, alleys, easements and building line setbacks, and any other similar public or private areas. Linear dimensions shall be expressed in feet and decimals of a foot;
(5) Radii, arcs, points of tangency and central angles for all curvilinear streets, and radii for all rounded corners;
(6) All lot lines and an identification system for all lots and blocks;
(7) An accurate outline of any property which is offered for dedication for public use;
(8) All survey monuments and bench marks, together with their descriptions; and
(9) The title and description of the property subdivided, showing its location and extent, point of compass, scale of the plan and name of the subdivider.
(b) A certificate from a registered land surveyor, stating that the plan represents a survey made by land surveyor, that the results of the survey are correctly shown thereon, and that the monuments shown actually exist, shall accompany the final plat.
(c) A certificate from the owner of the land, stating that all taxes due have been previously paid, shall accompany the final plat, and a certificate of title, or a photocopy thereof, shall be submitted for inspection.
(d) A certificate from the owner of the land, stating that he or she has caused the land to be platted and that he or she dedicates to public use the streets, parks and other land indicated on the plat as intended for public use, shall accompany the final plat.
(e) There shall be submitted with each plat a tabulation showing the exact area of each lot, reserve or other parcel on the plat (other than streets and alleys), such area to be computed inclusive of, and after the extensions of, lot or parcel lines to the centerline of contiguous public ways, such as streets or alleys. The purposes of this requirement is to facilitate calculation of the trunk sanitary benefit charges for each lot and parcel and not for conveyance purposes.
(f) The final plat is to be drawn at a scale of 100 feet or less to the inch from an accurate survey and on one or more sheets whose maximum dimensions are 24 by 36 inches. In certain unusual instances, where the subdivided area is of unusual size or shape, the Planning and Zoning Commission may permit a variation in the scale or size of the final plat.
(g) Space for approval of the final plat by the Franklin County Department of Health, as required, shall be provided on the final plat.
(Ord. 5-89, passed 5-8-1989)