(A) The homes shall meet all the requirements applicable to single-family dwellings and shall be subject to all necessary improvement, location, building and occupancy permits.
(B) The homes shall be larger than 720 square feet of occupied space or shall be required to meet the standards established by the appropriate zoning district, whichever is greater.
(C) The homes must be permanently attached to a foundation consisting of at least straight-line footers every eight feet and at least 24 inches deep; under the frame line of the manufactured home footer shall be a minimum of 16 inches and 24 inches deep; the excavated area under floor grade shall be completely enclosed with permanent perimeter foundation or basement walls, except for any required openings; provided further that, vinyl skirting may be allowed if it is interlocked horizontally or vertically.
(D) The homes shall be covered with an exterior material of one or more of the following types, which shall extend over the top of the foundation:
(1) Horizontal aluminum or vinyl lap siding;
(2) Cedar or wood siding;
(3) Weather resistant grain pressboard;
(4) Stucco, block or stone; and/or
(5) Any other material approved by the Executive Secretary of the Area Plan Commission.
(E) The homes shall have a roof composed of material customarily used on site-built residential buildings such as asbestos or metal, fiberglass, shake, asphalt or tile, which shall be installed onto a surface appropriately pitched for the materials used.
(Ord. 4-8-97-1, passed 4-8-1997) Penalty, see § 10.99