§ 152.026 OFFICE BUILDING IDENTIFICATION SIGN.

   (A)   One illuminated or non-illuminated office building identification sign attached flat on the facade of the building oriented toward the public street providing primary access and extending no more than 12 inches from the surface of the building is allowed per facade in the OR-1, OR-2, OR-3, OTF, W-1 or W-2 Districts and for permitted office uses within the TNZD zoning district.

   (B)   The signs shall meet the following requirements.

      (1)   In Neighborhood, Traditional Neighborhood, Town Center and Village Form Districts and TNZD zoning district, attached signs shall not exceed 32 square feet in area. In no event shall an attached sign be located more than three feet above the ceiling of the first floor of the building.

      (2)   In Campus, Regional Center, Suburban Workplace and Suburban Marketplace Corridor Form Districts, attached signs shall not exceed 100 square feet in area. In no event shall an attached sign be located more than three feet above the ceiling of the uppermost floor of the building.

      (3)   Within the Traditional Marketplace Corridor Form District and Traditional Workplace Form District, the tops of attached signs shall not be higher than 20 feet and shall not extend above the cornice line of the building. The size of the attached sign(s) shall not exceed 64 square feet in area.

      (4)   Freestanding signs are permitted in accordance with the applicable Form District requirements as listed in §§ 152.040 through 152.046. Office uses within the TNZD zoning district shall use the requirements of the Traditional Neighborhood Form District.

(Ord. 06-08, passed 4-6-2006)