A. Table 5-1: Commercial Districts Dimensional Standards establishes the dimensional standards for the residential districts. These regulations apply to all uses within each district unless a different standard is listed for a specific use.
B. The following restrictions apply to the O/R District:
1. All development in the O/R District is required to be a planned unit development.
2. A minimum district size of ten acres is required.
3. The standards of Table 5-1 apply to individual lots unless such standards are specifically modified by the PUD.
C. The following restrictions apply to the TC District:
1. The TC District may only be mapped on land that fronts upon the tollway and has main public access from the tollway and is oriented toward tollway users.
2. A minimum district size of ten acres is required.
O/R | H | TC |
O/R | H | TC | |
BULK | |||
Minimum Lot Area | 40,000 sf | 60,000 sf | 40,000 sf |
Minimum Lot Width | 100' | 100' | 100' |
Maximum Building Height | 45' | 45' | 45' |
Maximum FAR | .50 | .50 | .50 |
Maximum Impervious Surface | 75% | 75% | 80% |
SETBACKS | |||
Minimum Front Setback | 20' | 50' | Abutting highway: None required Abutting other ROW: 20' |
Minimum Interior Side Setback | 15' | 50' | None required |
Minimum Corner Side Setback | 20' | 50' | Abutting highway; None required Abutting other ROW: 20' |
Minimum Rear Setback | 50' | 50' | 50' when abutting any district other than TC District |
(Ord. 885, passed 11-21-2023)