APPENDIX C |
DESIGN CHECKLIST |
APPENDIX C |
DESIGN CHECKLIST |
Soils and Flood Hazard |
_____ System out of flood hazard, drainage ways. Stormwater Permit Review if applicable. |
_____ Soil test done within one year |
_____ Correct boring location shown on design (minimum 3 borings) |
_____ Significant characteristics (slope, parent material, permeability, limiting layers) |
Septic Design |
_____ Plat of Survey confirms lot dimensions, easements, restricted areas |
_____Correct building location shown |
_____ Number of Bedrooms matches septic design |
_____ House dimensions/foot print match septic design |
_____ Deck or floor drains shown on design |
_____ 4 copies of design (17" X 22") |
_____ All copies include signature and license expiration date of designer |
_____ Reference benchmark provided/Road(s) labeled, direction shown |
_____ Scale shown at 1:10, 1:20, 1:30 |
_____ Water supply, septic component, stormwater drywell, and special waste holding tank locations shown on subject and neighboring properties with dimensions to proposed septic/well |
_____ Dimensions from septic system to structures, property lines and bodies of water provided |
_____ Existing septic location shown on replacement septic system |
_____ Locations of underground utilities shown |
_____ Correct lineal or square footage shown |
_____ Septic system design calculations provided (sizing, LPP calculations, etc.) |
_____ Verification of how water softener discharge will be handled |
_____ Statement regarding whether system is designed for a hot tub and/or garbage grinder |
_____ Solid headers shown correctly, correct center to center spacing |
_____ Distribution system looped |
_____ Correct tank size |
_____ Effluent filter on tank if applicable, NSF approved |
_____ Lift station size, dose, reserve capacity, pump specifications, forcemain protection and alarm provided |
_____ All critical elevations provided (top of foundation, trenches, gravity flow) |
_____ Existing/proposed contours shown in 1 foot contours |
_____ Cover provided over septic tank, riser shown; if necessary |
_____ Statement of impact of fill provided if necessary |
_____ Separation from bottom of trench to limiting layer |
_____ Trench detail shows all required information |
_____ Side profile from foundation through seepage field shown |
_____ All variations requested in writing |
_____ Submittal consistent with municipal and/or subdivision plat requirements. |
_____ Incorporated - city water/sewer available |
_____ One-half acre suitable soils required |
_____ Parking barriers |
Non-Residential |
_____ Pre-design meeting with the Department |
_____ Design for peak load/additional flows _____ Completed non-residential agreement submitted |
_____ 100% future septic replacement area provide _____ Stormwater drywells shown with correct well setback |
_____ Floor drain/processing waste concerns addressed _____ Aeration unit registration |
_____ Parking/driveway shown (barriers?) _____ Special waste holding tank registration |
Remarks: ______________________________________________________________________________________ ______________________________________________________________________________________ |
(Ord. O-201711-51-031, passed 11-14-2017)