Upon receipt of a public works permit and/or an application for utility service, a standard service connection shall be provided by the City to the customer. It shall be a minimum of three-quarter inch (3/4") nominal internal diameter, extending from the main to just inside the property line, or other location approved by the City. The customer shall be responsible for providing all necessary parts (i.e., tapping saddle, pipe, fittings, curb-stop, meter box, setter, meter, meter transceiver unit (MXU), electronic register (ECR), etc., equipment and labor necessary for trench excavation, backfill and roadway restoration associated with the water service connection. The City shall provide oversight and assembly of all parts necessary to construct the service to ensure that it meets the City and any regulatory installation requirements. Once constructed and approved by the City, the City shall maintain the service components from the City's main up to and including the meter and meter pit assembly. The service line from the meter to the residence, business, or other place of use shall be the responsibility of the customer. (Ord. 970, 8-23-2018)