(A) The floor area ratio in the R1 District shall be:
(1) Residential uses, not applicable;
(2) All other permitted or conditional uses; the total floor area of all buildings or structures shall not exceed 25% of the total area of the zoning lot, including accessory structures.
(B) The floor area ratio in the R2 District: Not more than 40% of the total area of zoning lot, including accessory structures.
(C) The floor area ratio in the B1 District shall be:
(1) Floor area ratio shall not exceed .03 for the total area under initial unified development.
(2) If the development is subsequently divided into lots, permitted floor expansion for each lot shall be specified upon the application for a zoning certificate and recorded as a restrictive covenant.
(D) The floor area ratio in the B2 District: Shall not exceed two and one-half, except where public open areas are provided on the lot in excess of 10% of the area of the lot, the floor area ratio may be increased by 0.5 for each additional 5% of the lot reserved as public open area.
(E) The floor area in the B3 District: Shall not exceed 1.0.
(F) The floor area in the B4 District: Shall not exceed 0.8.
(G) The floor area in the M1 District: Shall not exceed 0.6.
(H) The floor area in the M2 District: Shall not exceed.65.
(I) The floor area in the M3 District: Shall not exceed 0.8.
(Ord. 1999-2, Zoning § 14, subs. .060, passed 2-15-1999)