This table shall be used to convert former zoning districts to current zoning districts. A landowner whose land was zoned under the former ordinance who disagrees with this conversion may appeal to the city’s Board of Zoning Appeals. The Board may change the former district to any appropriate district in this chapter and may impose additional restrictions of use and development standards as necessary to assure compatibility with existing area conditions and/or future development. Use of this table is restricted to the determination of the zoning district of a lot or parcel that has not been previously changed by a zoning map amendment. Existing use of a parcel that is not a permitted use within the converted zoning district is considered non-conforming and will require application to the Plan Commission for consideration of the appropriate zoning district. Further, any improvement to land or buildings must comply with all provision of this chapter.
District Designation | Former District |
District Designation | Former District |
FP - Floodplain Overlay | F-1 - Floodplain |
AG - Agricultural/Residential | A-1 - Agricultural |
OS - Open Space | C-1 - Conservation |
R1 - Residential Single-Family Low Density R1(a), R1(b), R1(c) and R1(d) | R-1 - One-Family Residence; R-5 - Rural One- and Two- Family where existing lots are less than 40,000 sqft on septic and 22,500 sqft on sanitary sewers |
R2 - Medium Density Residential (2 dwelling units per lot) | R-2 - One- and Two-Family Residence; R-5 - Rural One- and Two-Family where existing lots are 40,000 sqft or more, on septic and 22,500 sqft, or more, on sanitary sewers |
R3 - High Density Residential | R-3 - One- to Six-Family Residence; R-4 - Multi-Family Residence; R-6 Rural Multi-Family Residence |
B1 - Professional Business | B-1 - Retail Business; where use at time of adoption is for professional business |
B2 - Local Business | B-1 and B-2 - Retail and General Business; where area of existing retail building is 9,000 sqft or less; except where use at time of adoption is for professional business |
B3 - General Business | B-2 - General Business; where area of existing retail building is greater than 9,000 sqft; except professional uses |
B4 - Heavy Business | B-3 - Interchange Business |
I1 - Light Industrial | I-1 - Light Industrial |
I2 - Medium Industrial | I-2 - Medium Industrial |
I3 - Heavy Industrial | I-2 - Medium Industrial |
I4 - Special Industrial | No district |
PUD - Planned Unit Development | PUD Planned Unit Development and R-7 Mobile Home |
(Ord. 2001-1478, passed 11-19-2001)