The following standards apply to driveways, access drives, and parking areas, unless an exception or different standard is provided elsewhere in this title.
A. All residential other than multi-family.
1. The maximum width for surfaced parking and driveways in the front yard setback must not exceed 30 feet.
2. Access must be at least nine feet in width and paved in accordance to town standards.
3. Two adjacent townhomes may share a driveway centered on the property or parcel line with a maximum combined width of 30 feet.
4. In the downtown and blended use areas, tandem parking is permitted. A tandem parking space may be counted toward off-street parking requirements if both spaces are under the control of the same party.
5. No more than two access points are permitted from any one street.
B. All other uses.
1. Public parking areas must be designed so vehicles do not have to back out of the parking area onto a public street.
2. Driveways must be a minimum of ten feet wide for a single lane. A two-lane driveway must be twenty feet in width.
3. Access points to public roadways, distances between driveways, separations from intersections, and other similar traffic safety conditions shall meet current town engineering requirements and be approved by the town engineer.
4. Surfacing and drainage:
a. Driveways, parking lots, and display areas for vehicle parking must be surfaced to current town engineering requirements and be approved by the town engineer.
b. Every parking lot is subject to approval of a site plan review process.