1121.08 SURVEY MONUMENTS.

A complete survey shall be made by a registered surveyor. The traverse of the exterior boundaries of the tract and of each block, when computed from field measurements on the ground, shall close within a limit of error of one foot to 10,000 of the perimeter before balancing the survey.

(a) The corners of each lot shall be marked with iron rods minimum three-fourths inches in diameter by two feet minimum in length or as specified by the City Engineer.

(b) Monuments shall be placed at all block corners; angle points; points of corners; intersections and at intermediate points along streets as required by the City Engineer. The monuments shall be of such material, size and length as may be approved or specified by the City Engineer.

(Ord. 46-1962. Passed 8-17-62.)

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc