(A) These fence and wall standards apply to the following districts: AG, R1, R2, R3, R4, MH, PB, B1, B2, TC, LI and HI.
(1) Fences and walls shall be permitted in all zoning districts with a permit subject to conformance with the following requirements:
(a) All fences and walls shall present the non-structural face outward.
(b) All fences and walls may be permitted up to any property line that is not also a right-of-way line.
(c) All fences and walls shall be setback a minimum of two feet from all adjacent rights-of-way.
(d) No fence or wall may be placed in any right-of-way or any required sight visibility triangle.
(e) No fence or wall may be placed in any drainage, utility, sidewalk, landscaping, access or other easement without written permission from the easement holder.
(f) No fence or wall may be placed in any required buffer zone that does not specifically provide for the inclusion of fences.
(2) Fences specifically required by this chapter for screening, swimming pools, telecommunications facilities, or other purposes may exceed the maximum heights established by this section in a manner consistent with the specific requirements of this chapter.
(3) The height of a fence shall be determined by measuring from the highest grade to the highest point of the fence, including any posts or finials.
(B) These fence and wall standards apply to the following districts: R1, R2, R3, R4, MH, PB, B1, B2, TC, LI and HI. Fences and walls shall not exceed six feet in height in any side or rear yard and shall not exceed three feet in any front yard. For the purposes of this requirement, the front yard shall be defined as all areas located between any adjacent streets and the walls of the primary structure which face them.
(Ord. 2013-02, passed 3-11-13; Am. Ord. 2015-17, passed 8-24-15)