An alarm user shall:
a. Maintain the alarm site and the alarm system in a manner that will minimize or eliminate false alarms; and
b. Not manually initiate an alarm signal for any reason other than an occurrence of an event that the alarm signal was intended to report; and
c. Operate the alarm system only if the alarm system is functioning properly. If the alarm coordinator determines that false alarms are related to a defect or malfunction in an alarm system, the alarm coordinator may require the alarm user to produce a written report from a properly licensed alarm company which has inspected the alarm system stating the probable cause of the false alarms and actions taken or recommendations for eliminating the false alarms; and
d. Respond or cause a representative to respond to the alarm site within fifteen (15) minutes of being notified of alarm activation; and
e. Adjust the mechanism or cause the mechanism to be adjusted so that an alarm signal audible on the exterior of an alarm site will sound for no longer than ten (10) minutes; and
f. If an alarm system emits an alarm signal that is audible or visible from the exterior of a structure, adjust or cause to be adjusted, the alarm system so that upon activation the alarm system will not transmit another alarm signal without first being reset; and
g. Not operate an alarm system that uses an automatic dialing device to summon fire department units; and
h. Maintain at each alarm site a set of written operating instructions for each alarm system at that alarm site.