(1) Lot lines. Drainage and utility easements at least ten feet wide shall be provided on all lot lines (see diagram below). These easements may be centered on common rear and side lot lines. At a minimum, these easements shall be ten feet wide along all lot lines on streets and along all boundaries with land not being developed. The easements shall have continuity of alignment from block to block. At deflection points, an easement for a pole line anchor shall be provided where necessary.
(2) Drainage channels. Easements shall be provided along each side of the centerline of any waterway or drainage channel. The easements shall be of a sufficient width to provide for proper maintenance and protection of the waterway or channel, stormwater runoff and the installation and maintenance of drainage systems. The easements for drainage purposes shall not be less than 20 feet in width.
(3) Utilities. Easements shall be provided for all sanitary sewer, water main and stormwater facilities. The easements shall be of a sufficient width to provide for access, proper maintenance and protection of the facilities.
(Ord. 04-03, passed 2-24-2003)