§ 52.204 WATER METER REQUIREMENTS.
   (A)   Water service shall be provided with a valve on both sides of each meter. No fittings, except a coupler or union, shall be placed between a meter and a curb stop. These valves shall be a full port ball valve or other as approved by the Public Works Department. A pressure regulating valve must be installed on the incoming water line prior to any water distribution to a property.
   (B)   Only authorized employees of the town shall break a seal on a meter or meter bypass.
   (C)   No person shall ground or electrically connect any radio, telephone or other electrical system to the discharge side of any water meter.
   (D)   Meters two inches or larger shall have a meter bypass installed, with proper gate valves that can be sealed by the town.
   (E)   Only authorized town employees shall be allowed to install meter spacer pipes.
(Ord. 2019-5, passed 10-07-2019)