(a) Curbs shall be provided on all streets except in estate developments, planned unit developments or where waived by the Village. ODOT Item 609 Types 2-A or 2-B integral curbs may be constructed with concrete pavements. Curbs shall be plain Portland cement concrete ODOT 609 Type 6 modified for all asphalt concrete pavements. The joint between the pavement and curb shall be primed and sealed with liquid asphalt cement.
(b) Curbs shall conform to the following requirements.
(1) Minimum curb height shall be six inches (front).
(2) Minimum curb width shall be six inches.
(3) All curbs at right angle intersections shall have a minimum radius of twenty-five feet measured to the back of the curb, except for arterial, collector and commercial/industrial streets which shall have a radius specified by the Village Engineer. At intersections other than ninety degrees, the radius shall be as specified by the Village Engineer.
(4) Curb ramps shall be constructed at each street intersection and pedestrian crosswalk. Curb ramps shall have a nonslip surface and design shall be ODOT Standard Construction Drawing BP-7.1
(c) Downspout drains shall not outlet through curbs except with prior approval of the Village.
(d) Curb cuts shall be either saw-cut, broken out and replaced within twenty-four hours or saw-cut in-place with a horizontal saw. (Ord. 00-43. Passed 10-2-00.)