§ 153.044 LOTS.
   (A)   Size, shape, and orientation. Size, shape, and orientation of lots shall be appropriate to the location of the proposed subdivision and for the types of development contemplated in compliance with applicable requirements set forth in the Zoning Code.
   (B)   Minimum frontage and lot widths. Lot frontage and width shall comply to the requirements set forth in the Zoning Code.
   (C)   Access.
      (1)   General. All lots shall front on a public street, except as allowed in the Zoning Code.
      (2)   Lots fronting directly on a primary thoroughfare. Any lot which is platted after the enactment of this chapter and which fronts or is proposed to front directly on a primary thoroughfare as delineated on the Official Thoroughfare Plan shall have a turnaround provided in conjunction with the driveway serving the structure thereon to discourage autos from backing out onto the primary thoroughfare.
   (D)   Double frontage lots. Lots with double frontage shall not be approved except to avoid frontage upon heavily traveled thoroughfares.
   (E)   Lot lines. Side lines of lots shall be approximately at right angles or radial to the street line unless, in the opinion of the Plan Commission, a variation from this rule will give a better street and lot plan.
   (F)   Building setback lines. Minimum building setback lines shall comply to the requirements set forth in the Zoning Code.
(Ord. - -, passed - -) Penalty, see § 153.999