(A) When required by the Director of Utilities, the owner of any property serviced by a building sewer carrying industrial wastes shall install a suitable control manhole together with such necessary meters and other appurtenances in the building sewer to facilitate observation, sampling and measurement of the wastes. Such manhole, when required, shall be accessibly and safely located, and shall be constructed in accordance with plans approved by the Director of Utilities. The manhole shall be installed by the owner at his or her expense and shall be maintained so as to be safe and accessible at all times. Agents of the city, the state water pollution control agencies and the U.S. Environmental Protection Agency shall be permitted to enter all properties for the purpose of inspection, observation, measurement, sampling and testing.
(B) All measurements, tests and analyses of the characteristics of waters and wastes to which reference is made in this chapter shall be determined in accordance with the latest edition of "Standard Methods for the Examination of Water and Wastewater," published by the American Public Health Association and shall be determined at the control manhole provided, or upon suitable samples taken at the control manhole, except for applications for NPDES permits and report thereof which shall be conducted in accordance with rules and regulations adopted by the USEPA (40 CFR 136). In the event that no special manhole has been required, the control manhole shall be considered to be the nearest downstream manhole in the public sewer to the point at which the building sewer is connected. Sampling shall be carried out by customarily accepted methods to reflect the effect of constituents upon the sewage works and to determine the existence of hazards to life, limb and property. The particular analyses involved will determine whether a 24 hour composite of all outfalls of a premises is appropriate or whether a grab sample or samples should be taken. Normally, but not always, BOD and suspended solids analyses are obtained from 24 hour composites of all outfalls, whereas pH's are determined from periodic grab samples.
(`94 Code, § 52.68) (Ord. 6-1994, passed 6-6-94) Penalty, see § 52.999